Objective for day 1: Understand fundamentals of processes and powder

Thursday 18 May
07.30 - 08.00 Coach from Premier Inn Belgrade Plaza to MTC
 
08.00 - 09.00 Registration & Refreshments
 
09.00 - 09.10 Welcome and Introduction Dr Olivier Coube (EPMA)
Dr David Brackett (MTC)
09.10 - 09.20 Overview of AM technologies Dr David Brackett (MTC)
09.20 - 09.50 Technology focus 1: EBM Mr Emanuel Muzangaza (MTC)
09.50 - 10.20 Technology focus 2: Laser Powder Bed Fusion (L-PBF) Mr Sean-Anthony Smith (MTC)
10.20 - 10.50 End user perspective: Challenges and opportunities of using AM in automotive applications (Automotive) Mr Mark Barrington (Jaguar Land Rover)
10.50 - 11.20 End user perspective: Applications and certifcation (Aerospace structures) Mr David Eatock (Airbus)
11.20 - 11.40 Refreshment break  
11.40 - 12.10 Technology focus 3: Metal binder jetting Dipl Ing Claus Aumund-Kopp (Fraunhofer IFAM)
12.10 - 12.40 Technology focus 4: DED blown powder & DED-Hybrid Dr Carl Hauser (TWI)
12.40 - 13.00 Q&A Session with all speakers  
13.00 - 13.45 Lunch break  
15.45 - 14.25 Metal powder: Key characteristics to control Dr Jason Dawes (MTC)
14.25 - 14.55 Metal powder: Handling and safety Mr Gareth Evans (HSL)
14.55 - 15.15 Process gas for AM - Supplier perspective Mr Pierre Forêt (Linde AG)
15.15 - 15.35
Q&A Session with all speakers  
15.35 - 15.50
Refreshment break  
15.50 - 16.00
Movement to MTC building and prep for tour  
16.00 - 18.00
Tour of MTC AM facility (groups of 10 max.)  
16.00 - 16.30
SLM/EBM areas  
16.30 - 17.00
DED / DED-hybrid  
16.30 - 17.00
Powder characterisation lab  
17.30 - 18.00
Metrology & NDT lab  
18.30 - 19.00
Coach from MTC to dinner venue  
19.30 - 23.00
Seminar Dinner Venue: Coombe Abbey
23.00 - 23.30
Coach to Hotel
Premier Inn Belgrade Plaza
23.30 End of day 1  

 

Objective for day 2: Understand the manufacturing context for process and powder

Friday 19 May
07.45 - 08.15 Coach from Premier Inn Belgrade Plaza to MTC
 
08.30 - 09.00 Arrival & Refreshments  
09.00 - 09.10 Introduction Dr David Brackett (MTC)
09.10 - 09.40 Post-processing: Surface fnishing of complex AM parts Miss Bethan Smith (MTC)
09.40 - 10.00 Post-processing: The role of heat treatments/HIP for AM Dr Charley Carpenter (MTC)
10.00 - 10.20 HIP for Additive manufacturing Mr Magnus Ahlfors (Quintus Technologies)
10.20 - 10.50 AM inspection / NDT: Is XCT the solution? Dr Nick Brierley (MTC)
10.50 - 11.10 Refreshment break
 
11.10 - 11.40 End user perspective: What does it take in aero? (Aerospace engine) Mr David Stapleton (Rolls Royce)
11.40 - 12.20 AM Standards: Update on published and in-progress Dr Klas Boivie (SINTEF)
12.20 - 12.50 Cost of metal AM Dr Martin Baumers (Nottingham University)
12.50 - 13.35 Lunch break  
13.35 - 14.05 Design for AM and software overview Mr Andrew Triantaphyllou (MTC)
14.05 - 14.35 AM Testing and Qualification Mr Vukile Dumani (MTC)
14.35 - 15.05 End user perspective: Challenges and opportunities of using AM in medical applications (Medical) Dr Paul Unwin (Stanmore Implants)
15.05 - 15.25 Refreshment break  
15.25 - 16.00 Q&A Session with all speakers Chair: Dr David Brackett, MTC
16.00
End of day 2  
Go To Top